How to Use the Reverse-Install Tapping Block
Step 1
First, cut a piece of the flooring that is being installed to 1/2"x4" with an LVP cutter to use as a spacer
Step 2
Cut another piece to roughly 2.5" x 7", keeping the groove end on the plank
Step 3
Place the spacer between both bolts and the longer piece between the top and bottom of the tapping block
Step 4
Set the top piece into place and hand tighten the wingnuts to secure the plank in the tapping block
Step 5
Engage the next plank being installled with the flooring that is already installed
Step 6
Securely engage the tapping block onto the tongue of the plank, and use it as a normal tapping block